Anycubic Slicer Next Setting Question

[Eric1001]

I need some help with Anycubic Slicer Next. How do I set the in-fill to 10%, and set the model cooling fan to 100%

 

[Rapthorne_Darkness]

Go to the “Print Settings” tab, then under “Infill,” you’ll see a percentage slider then just drop that down to 10%. For the fan, open the “Cooling” section and set the “Max Fan Speed” to 100%. Don’t forget to re-slice after changing both, or it won’t save.

 

[Eric1001]

I can not find the Print Settings or the Cooling tabs.
I am very new to the Anycubic Slicer. Next.

 

[Eric1001]

Sorry for the repeated post. I do not know how to delete the post.