my Qidi Q1 Pro is broken

[freshRootb33r]

My brother must have messed with the printer again!
my Qidi Q1 Pro was printing perfectly, but now, right at the end of every single print, the bed slams into the nozzle! Like, seriously, violently moves up 3/4 inch.

Tech support had me update the Klipper config and relevel everything, but it still does it.
The only weird thing is Qidi Studio is automatically adding some random calibration file to the print queue before I even slice. I'm positive that extra code is what's causing the final crash.

How do I find and delete or disable that auto added calibration file? I bet that's the whole problem! does this ever happen to you guys?

 

[Alena_Santeem]

Honestly, Qidi Studio’s been buggy for months. It’s probably stacking commands at the end of your job file. Try slicing in OrcaSlicer instead like it reads the same Klipper config but skips the auto calibration junk. Prints clean, no violent homing at the end.

 

[Griff]

I had tried QidiStudio a few times in the past, but havent messed with it in ages. It used to do some really weird things from time to time, but nothing as egregious as that. I dont bother with it any more. I do my design work in FreeCAD, and just use QidiSlicer which has been really good for me. Current version is stable and no oddities that I've run across.

G

 

[Kirkis_Elf]

Ugh, that bed slam sound makes your stomach drop, right? My guess is Qidi Studio’s just being Qidi Studio like probably adding some leftover test file automatically. Maybe try clearing the job list before you slice again or check if there’s a random “auto-calibration” job showing up. If it disappears, you’ll know that’s what caused it.